Unimat Rubber Parking Stops are sturdy and durable and easily to be carried and installed, very often our customers ask us: How do you install rubber parking blocks? And we always say: just by one person, since they are light weighed just 34 lbs. Then they have another question: how to install parking blocks & stops in concrete and How much does it cost to put in a parking block? This is easier than anyone thinks, here in this guide we will give you a step by step description of hoe to do this, and you will find how inexpensive this is. In addition, you will take you through about what do you need to install parking blocks in asphalt and what do you need to install parking stops in concrete.
Concrete Anchor for rubber parking stops & blocks is included in our price, no one in the industry offers the hardware, you must buy it separately, our amazing prices are hardware included.
Therefore, if you are installing in asphalt ground the Asphalt anchor for rubber parking stops & blocks will be included in your purchase.
Anchoring parking blocks it is easy and minimum tools are needed. Parking block anchors are different based on the type of ground of your location, this is classified by: Asphalt or Concrete.
| SKU | Description | Length | Height | Width | Weight |
|---|---|---|---|---|---|
| SB206FT | 6 Ft Speed Bump (1) 6′ Section With no End Caps | 72″ | 2″ | 12″ | 48.40 |
| SB207FT | 7 Ft Speed Bump (1) 6′ Section + (2) End Caps | 86″ | 2″ | 12″ | 55.40 |
| SB213FT | Single Lane 12 Ft Speed Bump (2) 6′ Section With no End Caps | 144″ | 2″ | 12″ | 96.80 |
| SB219FT | Double lane 19 Ft Speed Bump (3) 6′ Section + (2) End Caps | 230″ | 2″ | 12″ | 152.20 |
| SB225FT | 25 Ft Speed Bump (4) 6′ Section + (2) End Caps | 302″ | 2″ | 12″ | 200.60 |
| SB2ECAP | End cap | 7′ | 2′ | 12′ | 3.50 |
| SKU | Description | Length | Height | Width | Weight |
|---|---|---|---|---|---|
| SB3039I | 39″ Speed Bump (1) 39″ Section With no End Caps | 39″ | 2″ | 13.7″ | 36.20 |
| SB3117I | 117″ Single Lane Speed Bump (3) 39″ Sections With no End Caps | 117″ | 2″ | 13.7″ | 108.60 |
| SB3137I | 137″ Single Lane Speed Bump (3) 39″ Sections + (2) End Caps | 137″ | 2″ | 13.7″ | 124.20 |
| SB3234I | 234″ Double lane Speed Bump (6) 39″ Sections With no End Caps | 234″ | 2″ | 13.7″ | 217.20 |
| SB3254I-2 | 254″ Double Lane Speed Bump (6) 39″ Sections + (2) End Caps | 254″ | 2″ | 13.7″ | 232.80 |
| SB3ECAP-2 | End cap | 10″ | 2″ | 13.7″ | 7.80 |
| SKU | Description | Length | Height | Width | Weight |
|---|---|---|---|---|---|
| SH1018I | 18.75″ Speed Bump (1) 18.75″ Section with no End Caps | 18.75″ | 1.25″ | 2″ | 22.20 |
| SH1112I | 112.5″ Single Lane Speed Bump (6) 18.75″ Sections with no End Caps | 112.5″ | 1.25″ | 2″ | 133.20 |
| SH1128I | 10 Ft Single Lane Speed Bump (6) 18.75″ Sections + (2) End Caps | 128.5 | 1.25″ | 2″ | 148.80 |
| SH1225I | 225″ Double Lane Speed Bump (12) 18.75″ Sections with no End Caps | 225″ | 1.25″ | 2″ | 266.40 |
| SH1241I | 20 Ft Double Lane Speed Bump (12) 18.75″ Sections + (2) End Caps | 241″ | 1.25″ | 2″ | 282.00 |
| SH1ECAL | LEFT End Cap | 8″ | 1.25″ | 2′ | 7.80 |
| SH1ECAR | RIGHT End Cap | 8″ | 1.25″ | 2′ | 7.80 |
| SKU | Description | Length | Height | Width | Weight |
|---|---|---|---|---|---|
| SH2019I | 19.75″ Speed Bump (1) 19.75″ Section With no End Caps | 19.75″ | 2″ | 3″ | 48.00 |
| SH2121I | 10 Ft Single Lane Speed Bump (5) 19.75″ Sections + (2) End Caps | 121.75″ | 2″ | 3″ | 273.00 |
| SH2240I | 20 Ft Double Lane Speed Bump (11) 19.75″ + (2) End Caps | 240″ | 2″ | 3″ | 561.00 |
| SH2ECAL | LEFT End cap | 11.5″ | 2″ | 3′ | 16.00 |
| SH2ECAR | RIGHT End cap | 11.5″ | 2″ | 3′ | 16.00 |
Our rubber parking blocks are made from durable material. Unimat parking block will flex slightly to lie flat on uneven or cracked surfaces. Rubber Parking Blocks have 4 counter-sunk mounting holes per block and all installation hardware is included. Unimat rubber parking blocks have many benefits, such as:
- Made of 80% virgin rubber and 20% recycled rubber, which makes it more resistant.
- Heavy duty reflective stripes to improve nighttime visibility.
- Our recycled rubber parking block is weather resistant with great durability.
- Impervious to sunlight or road salt.
- Conforms to uneven surfaces.
- Low profile curbs will not damage vehicles with low front ends.
- High quality perfect for any parking areas.
- Designed to endure weather and vehicle contact.
- It has 4 mounting holes for permanent installation on asphalt or concrete ground.
- Includes Hardware for Mounting.
- Material: Rubber
- Length: 6 ft.
Rubber Parking Stops Manufacturer
Unimat Traffic offers the best prices since we are Manufacturer and have different packages for
Distributors and Suppliers, you can single units or Wholesale.
We have clients all over the world, we are fully stocked and can ship right away.
We have the lowest prices of the market.
Our customer service representatives are always ready to assist you and can answer any technical and specific questions.
The following is a complete Rubber parking block & stop installation guide.
What do you need to install Parking Stops in Asphalt?
- Steel spikes (we provide the hardware in our low price)
- Hammer High-speed and small sledge
- Activated epoxy resin (this is not necessary jut recommended)
ASPHALT SPIKES INCLUDED IN OUR LOW PRICE
Now that you have the necessary equipment please follow these steps:
A- Determine the location of the Wheel Stop and sweep the surface clean of debris / dust. Use chalk to mark the Hole Place.
B- Drill the holes with 14MM diameter and 120MM depth.
C- Make sure the holes are clear of dust and debris before installing the shields.
D- After each hole is drilled, insert a plastic shield in order to keep the units from shifting.
Note: (A portable blower is useful for this purpose)
F- Insert the bolts and steel washers into the product installation holes and tighten every element.
What do you need to install Parking Stops in Concrete?
- Steel spikes (we provide the hardware in our low price)
- Hammer High-speed and small sledge
- Activated epoxy resin (this is not necessary jsut recommended)
CONCRETE SPIKE KIT INCLUDED IN OUR LOW PRICE
Now that you have the necessary equipment please follow these steps:
A- Determine the location of the Wheel Stop and sweep the surface clean of debris / dust. Use chalk to mark the Hole Place.
B- Drill the holes with 14MM diameter and 120MM depth.
C- Make sure the holes are clear of dust and debris before installing the shields.
D- After each hole is drilled, insert a plastic shield in order to keep the units from shifting.
Note: (A portable blower is useful for this purpose)
F- Insert the bolts and steel washers into the product installation holes and tighten every element.
Quick installation, rebar spikes sold separately. Rubber Parking Blocks feature molded reflective tape for high visibility and safety. Parking blocks are made with corrosion resistant recycled rubber for long lasting durability, at our company we take quality to the top level. Galvanized steel spikes may be used to install on asphalt surfaces while lag bolts and shields may be used on asphalt or concrete. Installation hardware is included in the price, we offer the best, we offer 5 Year Limited Warranty. Give us a call right away and we will be more than happy to assist you.
Unimat rubber wheel chocks are designed to bring safety to any parking areas, they are also top quality and the cost is very low, we offer the lowest prices on the market, we manufacture with top quality and we are ready to deliver your order within a day, we have plenty of stock ready to go, please call us and visit our website, any of our sales representative will be more than happy to assist you!