The sooner you know the traffic signals much better, this should be the basic premise of this type of courses. Throughout the courses, children, among other things, learn the meaning of: pedestrian crossing, zebra crossing, bus stop, STOP, direction required, forbidden direction, traffic light (what is, their implications in the passage of pedestrians, etc.
In this way they learn to differentiate all elements of public roads: sidewalk, curb and road, knowing where and how to cross.
Maintain a safe pedestrian environment by slowing down vehicle traffic with our 6′ Speed Bump. Our prices are the lowest in the market and they include the hardware, the 6 foot speed bump can permanently be installed on asphalt or concrete using its pre-drilled countersink mounting holes. Maintain a safe pedestrian environment by slowing down vehicle traffic with our great 6’ heavy-duty economy speed bumps. Our products will give you total satisfaction and your roads will be safe and people as well, areas like parking lots and much more will be protected.
Although speed bumps are effective in keeping vehicle speeds down, their use is sometimes controversial, as they can increase traffic noise, may damage vehicles if traversed at too great a speed, and slow emergency vehicles. Poorly-designed speed bumps that stand too tall or with too-sharp an angle can be disruptive for drivers, and may be difficult to navigate for vehicles with low ground clearance, even at very low speeds.
6’ Economy Recycled Rubber Heavy Duty Speed Bump
SKU | Description | Length | Height | Width | Weight |
---|---|---|---|---|---|
SB206FT | 6 Ft Speed Bump (1) 6′ Section With no End Caps | 72″ | 2″ | 12″ | 48.40 |
SB207FT | 7 Ft Speed Bump (1) 6′ Section + (2) End Caps | 86″ | 2″ | 12″ | 55.40 |
SB213FT | Single Lane 12 Ft Speed Bump (2) 6′ Section With no End Caps | 144″ | 2″ | 12″ | 96.80 |
SB219FT | Double lane 19 Ft Speed Bump (3) 6′ Section + (2) End Caps | 230″ | 2″ | 12″ | 152.20 |
SB225FT | 25 Ft Speed Bump (4) 6′ Section + (2) End Caps | 302″ | 2″ | 12″ | 200.60 |
SB2ECAP | End cap | 7′ | 2′ | 12′ | 3.50 |
Premium Recycled Rubber Safety-Striped Speed Hump – Reflective Rubber
SKU | Description | Length | Height | Width | Weight |
---|---|---|---|---|---|
SB3039I | 39″ Speed Bump (1) 39″ Section With no End Caps | 39″ | 2″ | 13.7″ | 36.20 |
SB3117I | 117″ Single Lane Speed Bump (3) 39″ Sections With no End Caps | 117″ | 2″ | 13.7″ | 108.60 |
SB3137I | 137″ Single Lane Speed Bump (3) 39″ Sections + (2) End Caps | 137″ | 2″ | 13.7″ | 124.20 |
SB3234I | 234″ Double lane Speed Bump (6) 39″ Sections With no End Caps | 234″ | 2″ | 13.7″ | 217.20 |
SB3254I-2 | 254″ Double Lane Speed Bump (6) 39″ Sections + (2) End Caps | 254″ | 2″ | 13.7″ | 232.80 |
SB3ECAP-2 | End cap | 10″ | 2″ | 13.7″ | 7.80 |
Recycled Rubber Speed Hump – Yellow / Black Single Lane or Double Lane
SKU | Description | Length | Height | Width | Weight |
---|---|---|---|---|---|
SH1018I | 18.75″ Speed Bump (1) 18.75″ Section with no End Caps | 18.75″ | 1.25″ | 2″ | 22.20 |
SH1112I | 112.5″ Single Lane Speed Bump (6) 18.75″ Sections with no End Caps | 112.5″ | 1.25″ | 2″ | 133.20 |
SH1128I | 10 Ft Single Lane Speed Bump (6) 18.75″ Sections + (2) End Caps | 128.5 | 1.25″ | 2″ | 148.80 |
SH1225I | 225″ Double Lane Speed Bump (12) 18.75″ Sections with no End Caps | 225″ | 1.25″ | 2″ | 266.40 |
SH1241I | 20 Ft Double Lane Speed Bump (12) 18.75″ Sections + (2) End Caps | 241″ | 1.25″ | 2″ | 282.00 |
SH1ECAL | LEFT End Cap | 8″ | 1.25″ | 2′ | 7.80 |
SH1ECAR | RIGHT End Cap | 8″ | 1.25″ | 2′ | 7.80 |
Heavy Duty Rubber Speed Hump – Yellow / Black – Low Profile Speed Bump
SKU | Description | Length | Height | Width | Weight |
---|---|---|---|---|---|
SH2019I | 19.75″ Speed Bump (1) 19.75″ Section With no End Caps | 19.75″ | 2″ | 3″ | 48.00 |
SH2121I | 10 Ft Single Lane Speed Bump (5) 19.75″ Sections + (2) End Caps | 121.75″ | 2″ | 3″ | 273.00 |
SH2240I | 20 Ft Double Lane Speed Bump (11) 19.75″ + (2) End Caps | 240″ | 2″ | 3″ | 561.00 |
SH2ECAL | LEFT End cap | 11.5″ | 2″ | 3′ | 16.00 |
SH2ECAR | RIGHT End cap | 11.5″ | 2″ | 3′ | 16.00 |
There’s more to parking lot maintenance than patching potholes and sealcoating. Speed bumps eventually need repair, the concrete in car stops eventually degrades and replacements are needed, and storm drain catch basins require cleaning and maintenance.
Don’t wait until an injury or accident occurs on your property that forces you to address long-neglected maintenance–it’s going to cost you a lot more than if you take care of it right now.
- Speed Bumps maintain and control vehicle speed for high traffic areas.
- Mounting holes allow for permanent installation on asphalt or concrete.
- Manufactured from durable Rubber,Provides chemical,Weather and corrosion resistance.
- Yellow Stripes enhances Driver Visibility for Safety and Security.
- Creates a safer driving environment for roads,parking lots,and more.
- Dimension: 72″ × 12″ × 2”
There are many benefits about using speed bumps to make your roads a safer place, they are Ideal to be used in areas like: parking lots, schools, public playgrounds, hospitals zones and residential & industrial areas. Also Very easy to assemble, installation can be placed on concrete or asphalt. Another great quality is that speed bumps are perfect for any type of weather conditions, this product is very resistant, will not crack or break. We have the best prices and mounting screw are included in the price and in addition we offer great 5 years warranty. Call us now for a free estimate our main priority is customer service.
Our Economy Rubber Speed Bumps are constructed from a very durable blend of vulcanized rubber. These economy rubber speed bumps are designed to reduce and control the speed of vehicles in parking lots, roadways, and private lanes. Our speed bumps include high visibility yellow stripes which are molded into the speed bump for durability and embedded glass reflectors for increased visibility.