Since speed bumps and speed humps require cars to slow down, they contribute to increased safety on roadside construction sites (or risk damaging their vehicle). However, there are some significant variations between them that you should be aware of before making a purchase.

Speed Bump:

In an area where fast-driving automobiles might endanger pedestrians, construction workers, and anybody else in the neighborhood, a speed bump is a device that raises the surface of a concrete or asphalt road by anywhere from 3 inches to 6 inches to slow down vehicles. Generally speaking, speed bumps are constructed of recyclable rubber, although they may also be found in other materials such as plastic or metal. Drivers can easily detect them because of their black and yellow color, which allows them to slow down in time.

Effectiveness of the Speed Bumps:

In order to keep people safe, speed bumps are installed. Drivers are not always conscientious about following speed restrictions, but they must be on the lookout for speed bumps in order to prevent damaging their vehicles.

When placed on roads with little traffic and low speed restrictions, speed bumps are the most effective deterrents. The use of speed bumps and humps is not the greatest choice while travelling along a curved highway. Additionally, it will not function on roadways with a slope, or inclination, greater than 8 percent.

The following are some examples of when speed bumps are very beneficial:

  • Areas with commercial potential
  • Areas with a heavy industrial presence
  • Parks
  • Areas where people live
  • Zones around schools
  • Sporting events take place in a variety of locations.

Speed Bumps vs. Speed Humps: Cost and Usage

While sometimes used interchangeably, speed bumps and speed humps have slight differences:

Speed Bumps:

  • Cost: $1,000 – $1,500 installation per bump.
  • Features: Steeper incline, shorter length (around 3-5 feet), designed for very low speeds (2-5 mph).
  • Usage: Typically in private driveways or parking lots.

Speed Humps:

  • Cost: $2,000 – $5,000 installation per hump (can vary depending on size and material).
  • Features: Gentler incline, longer length (usually 10-15 feet), designed for moderate speeds (10-15 mph).
  • Usage: More common on public roads, residential areas, school zones, and near crosswalks.

Bumps in Parking Lots:

These are usually speed bumps due to their purpose of controlling slow-moving vehicles within the parking area.

Private Roads in the USA:

Installing speed bumps on private roads in the USA is generally possible, but regulations and permissions vary by state and local municipality. Here’s what you need to consider:

  • Local ordinances: Check with your local traffic or engineering department for specific regulations and permitting processes.
  • Homeowner’s association (HOA) rules: If your property is under an HOA, there might be additional restrictions or approval requirements.
  • Professional installation: While DIY kits exist, professional installation ensures proper placement, materials, and compliance with regulations.

Remember, installing speed bumps carries legal and safety implications. Thoroughly research local regulations and consider professional installation for a safe and compliant solution.

6’ Economy Recycled Rubber Heavy Duty Speed Bump

SKU Description Length Height Width Weight
SB206FT 6 Ft Speed Bump (1) 6′ Section With no End Caps 72″ 2″ 12″ 48.40
SB207FT 7 Ft Speed Bump (1) 6′ Section + (2) End Caps 86″ 2″ 12″ 55.40
SB213FT Single Lane 12 Ft Speed Bump (2) 6′ Section With no End Caps 144″ 2″ 12″ 96.80
SB219FT Double lane 19 Ft Speed Bump (3) 6′ Section + (2) End Caps 230″ 2″ 12″ 152.20
SB225FT 25 Ft Speed Bump (4) 6′ Section + (2) End Caps 302″ 2″ 12″ 200.60
SB2ECAP End cap 7′ 2′ 12′ 3.50

Premium Recycled Rubber Safety-Striped Speed Hump – Reflective Rubber

SKU Description Length Height Width Weight
SB3039I 39″ Speed Bump (1) 39″ Section With no End Caps 39″ 2″ 13.7″ 36.20
SB3117I 117″ Single Lane Speed Bump (3) 39″ Sections With no End Caps 117″ 2″ 13.7″ 108.60
SB3137I 137″ Single Lane Speed Bump (3) 39″ Sections + (2) End Caps 137″ 2″ 13.7″ 124.20
SB3234I 234″ Double lane Speed Bump (6) 39″ Sections With no End Caps 234″ 2″ 13.7″ 217.20
SB3254I-2 254″ Double Lane Speed Bump (6) 39″ Sections + (2) End Caps 254″ 2″ 13.7″ 232.80
SB3ECAP-2 End cap 10″ 2″ 13.7″ 7.80

Recycled Rubber Speed Hump – Yellow / Black Single Lane or Double Lane

SKU Description Length Height Width Weight
SH1018I 18.75″ Speed Bump (1) 18.75″ Section with no End Caps 18.75″ 1.25″ 2″ 22.20
SH1112I 112.5″ Single Lane Speed Bump (6) 18.75″ Sections with no End Caps 112.5″ 1.25″ 2″ 133.20
SH1128I 10 Ft Single Lane Speed Bump (6) 18.75″ Sections + (2) End Caps 128.5 1.25″ 2″ 148.80
SH1225I 225″ Double Lane Speed Bump (12) 18.75″ Sections with no End Caps 225″ 1.25″ 2″ 266.40
SH1241I 20 Ft Double Lane Speed Bump (12) 18.75″ Sections + (2) End Caps 241″ 1.25″ 2″ 282.00
SH1ECAL LEFT End Cap 8″ 1.25″ 2′ 7.80
SH1ECAR RIGHT End Cap 8″ 1.25″ 2′ 7.80

Heavy Duty Rubber Speed Hump – Yellow / Black – Low Profile Speed Bump

SKU Description Length Height Width Weight
SH2019I 19.75″ Speed Bump (1) 19.75″ Section With no End Caps 19.75″ 2″ 3″ 48.00
SH2121I 10 Ft Single Lane Speed Bump (5) 19.75″ Sections + (2) End Caps 121.75″ 2″ 3″ 273.00
SH2240I 20 Ft Double Lane Speed Bump (11) 19.75″ + (2) End Caps 240″ 2″ 3″ 561.00
SH2ECAL LEFT End cap 11.5″ 2″ 3′ 16.00
SH2ECAR RIGHT End cap 11.5″ 2″ 3′ 16.00

What Is The Difference Between Speed Bumps And Speed Humps?

Speed humps and speed bumps are both designed to act as a vertical deterrent on the road to encourage vehicles to adhere to the posted speed limit, but it is crucial to understand the differences between the two in order to make the best purchase option. Speed humps, which are somewhat bigger and longer than speed bumps, seem to function best for keeping traffic between 10 and 15 miles per hour, whereas speed bumps tend to work best for keeping traffic between 2 and 10 miles per hour. Drivers often encounter speed humps in a succession in residential neighbourhoods, although speed bumps may be used to slow down traffic in a single location, such as a parking lot, if the area is large enough.

Do Speed Bumps Damage Cars?

When automobiles go over speed bumps at an average speed, the car may sustain severe damage, particularly to the shock absorbers and springs. The shocks in a car absorb the force of normal driving circumstances, but they are incapable of absorbing the impact of a speed bump. Going too rapidly over the speed bump might cause damage to the car’s shocks, which may eventually need the replacement of the shocks. Furthermore, the speed bump has the potential to harm your tyres. If your tyre blows, you’ll have to have a new one installed. Both of these fixes will result in a significant cost from the technician.

What Are The Benefits Of Speed Bumps?

The most significant benefit of speed bumps is that they are a cost-effective method of reducing automobile accidents, particularly in locations with a large concentration of pedestrians. Using speed bumps, on the other hand, has a number of additional advantages. Some of the most significant benefits are as follows:

  • Protective against ultraviolet radiation, dampness, and oil
  • Increased visibility, even at night, is made possible with portable durable reflectors.
  • Installation is simple.

With the right instructions, almost anybody can put up a speed bump in their driveway. You may select whether to permanently install the speed bumps or to make them detachable for road maintenance purposes. Speed bumps are also built to survive for years, even when subjected to the wear and tear of passing vehicles as well as the weather, such as the sun or hail storms. They can even withstand the oil and chemicals that they come into contact with. Finally, reflective materials are used on speed bumps to guarantee that drivers can see them even while driving at night!

How Much Does It Cost To Install Speed Bumps?

For the most part, you may expect to spend between $1000 and $1500 to have a speed bump or speed hump installed. However, the cost varies significantly depending on the exact project, as well as the kind and number of speed bumps necessary. It is possible that the expense will result in savings in the long run when it comes to insurance. It is possible that putting speed bumps can reduce your insurance premiums. As an added bonus, you raise the level of safety, increasing the value of your home or business property.

Where Can Speed Bump Installation Be Done?

Before you can put a speed bump in a certain location, you must first determine where they may be placed. A speed bump or speed hump that is placed in an inappropriate location might cause a danger instead of safe driving conditions for motorists. In addition, you do not have the ability to place a speed bump anywhere you wish on the road.

The following are examples of locations where a speed bump may be installed:

  • Shopping malls and shopping centerscentres
  • Schools
  • Private Clubs and Associations
  • Bus Stations are located at a variety of locations across the city.
  • Hospitals
  • Buildings used for commercial purposes

What Are Some of the Other Traffic Calming Measures Available?

When it comes to reducing the speed of automobiles in a certain region, bollards, stop signs, speed radars, and cameras are all excellent alternatives to speed bumps and speed humps to consider.

Speed bumps and speed humps don’t always provide the desired outcomes, particularly when you need to bring a vehicle to a complete stop rather than just slow it down. When it comes to keeping traffic under control, you do have alternative choices, which is fortunate. Among the numerous techniques are the following:

  • Barriers to Resistance
  • Barricades and Warning Gates in Jax
  • Barricades with a wedge shape

These obstacles will not only compel a vehicle to come to a complete stop, but they will also slow the vehicle down. As a result, they are useful for traffic inspections and when you need to restrict automobiles off a certain road or section of a property.