Are speed bumps good or bad?
This product is ideal for residential, commercial, industrial areas, parks, sporting venues, school zones. Excellent to effectively slow down vehicle traffic, they are made from very durable rubber. These economy rubber speed bumps are designed to reduce and control the speed of vehicles in parking lots, roadways, and private lanes. It can be used as a 2-channel cable protector and as a speed bump, very versatile product. It comes with durable bright yellow embedded EPDM rubber strip that increases visibility. It is 6 feet long and 2 inches high and weights 48 lbs, very easy to install and manage by just one person. Our speed bump comes with a molded-in cat eye reflectors and bright yellow EPDM rubber offer high visibility; it slows vehicles to 5 MPH.
Do speed bumps actually work?
Yes, speed bumps are the perfect solution to slow down traffic and create more safety in areas like, schools, residential, hospitals, park and many others.
Speed humps are the most effective tool to provide safety on the roads, the come in different wide ranges and speed humps are modular, we have them in 2 feet and 3 feet wide, this is the perfect measurement to have vehicle slowdown in important areas like schools, parks, and much more. Vehicles can pass over them and can safely maintain speeds of 15–20 miles per hour. They are better suited for local roads and lanes where low speeds are preferred but full stops are not necessary or convenient. Being their main benefit that speed humps encourage low speeds without forcing the driver to come to a full stop. Speed humps are legal for authorized use on public roads and any other area where they might be needed to increase safety.
Is it better to go over speed bumps fast or slow?
Slow, when you travel fast over a speed bump, you can case some damage to your car, therefore your shocks are unable to absorb the energy that rapidly, so this can cause damage like bending out of shape or leaking hydraulic fluid.
If you are driving and you do not see a speed bump in time, this can certainly wreck your alignment. But they can also damage parts of your steering or suspension systems, like shocks, struts, and joints, as well as exhaust parts, the chassis, body panels or oil pan.
Why are speed bumps good?
The main factor for accidents is drivers speeding, driving faster cased drivers to have less time to respond to road conditions and any resulting collision causes more damage. To solve the issue of speeding, there are many traffic tools that can be chosen to encourage safe driving. Speed limits, speed bumps, speed humps, roundabouts, and signs are among the strategies used to slow drivers down and increase driver awareness. Maintain a safe pedestrian environment by slowing down vehicle traffic with our speed bump. Speed Bumps are the ideas solution to slow down traffic.
Do speed bumps reduce home values?
Having speed bumps in neighborhoods will actually increased the value of houses, since the area will be considered safer.
Speed bumps now a days are used in all commercial and residential areas.
Parking bumpers are used for commercial and residential purposes, most importantly, the results do not revert over time. Other traffic calming measures such as “slow” signs lose efficacy with age. The reduction in speed and traffic volume from speed humps can remain long after local drivers become accustomed to their presence. Speed Bump is a unique modular traffic calming device designed to safely slow traffic while maintaining continuous traffic flow.
How fast can you go over speed bumps?
You should go over a speed bump in a speed of 5 mph.
This original engineered system is multi-faceted to create parabolic speed humps, speed tables and raised crosswalks. Ideal for neighborhood traffic calming (municipalities), school zones, parking lots, hospitals, shopping malls, apartment complexes and any area accessed by emergency vehicles.
It is very important to install speed bumps and humps around your facility to reduce the speed of traffic. Parking lot speed bumps are now a days a product needed for public spaces.
Are speed bumps expensive?
No, speed bumps are sold in regular prices, this is not expensive, and they can bring so many benefits to the roads. We offer the best prices on the market; you can have a set of speed bumps under 200 dollars with the spikes included.
These are some of the great benefits: Never need painting, Easy 1 person installation, Removable for snow plowing or pavement maintenance, Cost effective, years of high performance with low maintenance, Four different mounting hardware’s to choose from (included free of charge)
What is the difference between speed bumps and speed bumps?
The speed bumps and usually longer, and speed humps and thicker, speed bumps are a bit more aggressive traffic calming options than speed humps, and so are useful in places where pedestrians and cars share space closely, like parking lots and driveways. The speed bumps have more height; therefore speed bumps can be two to four inches high, but they have a much shorter travel distance than speed humps.
Where do you put speed bumps?
Speed Bumps can be placed in any areas where you need safety on the roads and you need traffic to slow down. This product is ideal for residential, commercial, industrial areas, parks, sporting venues, school zones. Excellent to effectively slow down vehicle traffic, they are made from very durable rubber. These economy rubber speed bumps are designed to reduce and control the speed of vehicles in parking lots, roadways, and private lanes.
Can you install your own speed bumps?
Yes, they are very easy to install and light weighted, just 1 person can put it together. These are the steps you will need to follow:
- Determine the location of the Speed hump and sweep the surface clean of debris / dust. Use chalk to mark the center lines (parallel and perpendicular to the direction of the street) and border lines on the surface.
- Assemble and position the units, starting from the center line (parallel to the direction of the street).
- Drill 12MM diameter holes into the surface, through the existing holes of the placed units. The holes should be 120-140MM deep in order to accommodate the plastic shields that are 100MM long.
- Make sure the holes are clear of dust and debris before installing the shields. After each hole is drilled, insert a plastic shield in order to keep the units from shifting.
- Insert the bolts and steel washers into the product installation holes and tighten every element.
How much will my shipping costs be? / How are your mats shipped to me?
Shipping is not included, cost will be calculated base on delivery zip code, quantity and weight.
We may collect information about our customers including name, address, email, and phone numbers. Please be assured that we keep all our customer information safe and secure. All information is strictly kept for in-house use only and will never rent, sell or trade your information to any other company or individual for any reason.
Is there a minimum order policy?
Our company offers you the benefit of the only No Minimum “Drop-Ship” policy in our industry.
Where do you provide speed bumps and cable protectors in Denver?
We provide speed bumps and cable protectors for:
West Palm Beach
Town ‘n’ Country
Palm Beach Gardens
North Miami Beach
North Fort Myers
South Miami Heights
West Little River
Royal Palm Beach
Land O’ Lakes
Vero Beach South
East Lake-Orient Park
New Smyrna Beach
Palm River-Clair Mel
Sunny Isles Beach
Fort Walton Beach
Sun City Center
San Carlos Park
New Port Richey
Upper Grand Lagoon
World Golf Village
Port St. John
Panama City Beach
North Palm Beach
Gulf Gate Estates
New Port Richey East
St. Pete Beach
North Weeki Wachee
Indian Harbour Beach
St. Augustine Shores
West Vero Corridor
North Bay Village
Green Cove Springs
Inverness Highlands South
Silver Springs Shores
Fort Pierce North
Fort Myers Beach
Indian River Estates
St. Augustine Beach
Islamorada Village of Islands
South Patrick Shores
South Gate Ridge
Bay Harbor Islands
Jan Phyl Village
Fort Myers Shores
Palm Springs North
Hutchinson Island South
De Funiak Springs
Fort Pierce South
Warm Mineral Springs
St. Augustine South
Ridge Wood Heights
Big Pine Key
Daytona Beach Shores
Lochmoor Waterway Estates
Indian Rocks Beach
Indian River Shores
Lower Grand Lagoon
St. James City
Port St. Joe
Lake Clarke Shores
Lake Belvedere Estates
Dade City North
North River Shores
Royal Palm Estates
De Leon Springs
Big Coppitt Key
Inverness Highlands North
Hill ‘n Dale
Pine Island Center
Burnt Store Marina
Crooked Lake Park
Lake Mary Jane
North Redington Beach
Plantation Mobile Home Park
North Key Largo
South Palm Beach
Weeki Wachee Gardens
Palm Beach Shores
Lake Mack-Forest Hills
|SB206FT||6 Ft Speed Bump (1) 6′ Section With no End Caps||72″||2″||12″||48.40|
|SB207FT||7 Ft Speed Bump (1) 6′ Section + (2) End Caps||86″||2″||12″||55.40|
|SB213FT||Single Lane 12 Ft Speed Bump (2) 6′ Section With no End Caps||144″||2″||12″||96.80|
|SB219FT||Double lane 19 Ft Speed Bump (3) 6′ Section + (2) End Caps||230″||2″||12″||152.20|
|SB225FT||25 Ft Speed Bump (4) 6′ Section + (2) End Caps||302″||2″||12″||200.60|
|SB3039I||39″ Speed Bump (1) 39″ Section With no End Caps||39″||2″||13.7″||36.20|
|SB3117I||117″ Single Lane Speed Bump (3) 39″ Sections With no End Caps||117″||2″||13.7″||108.60|
|SB3137I||137″ Single Lane Speed Bump (3) 39″ Sections + (2) End Caps||137″||2″||13.7″||124.20|
|SB3234I||234″ Double lane Speed Bump (6) 39″ Sections With no End Caps||234″||2″||13.7″||217.20|
|SB3254I-2||254″ Double Lane Speed Bump (6) 39″ Sections + (2) End Caps||254″||2″||13.7″||232.80|
|SH1018I||18.75″ Speed Bump (1) 18.75″ Section with no End Caps||18.75″||1.25″||2″||22.20|
|SH1112I||112.5″ Single Lane Speed Bump (6) 18.75″ Sections with no End Caps||112.5″||1.25″||2″||133.20|
|SH1128I||10 Ft Single Lane Speed Bump (6) 18.75″ Sections + (2) End Caps||128.5||1.25″||2″||148.80|
|SH1225I||225″ Double Lane Speed Bump (12) 18.75″ Sections with no End Caps||225″||1.25″||2″||266.40|
|SH1241I||20 Ft Double Lane Speed Bump (12) 18.75″ Sections + (2) End Caps||241″||1.25″||2″||282.00|
|SH1ECAL||LEFT End Cap||8″||1.25″||2′||7.80|
|SH1ECAR||RIGHT End Cap||8″||1.25″||2′||7.80|
|SH2019I||19.75″ Speed Bump (1) 19.75″ Section With no End Caps||19.75″||2″||3″||48.00|
|SH2121I||10 Ft Single Lane Speed Bump (5) 19.75″ Sections + (2) End Caps||121.75″||2″||3″||273.00|
|SH2240I||20 Ft Double Lane Speed Bump (11) 19.75″ + (2) End Caps||240″||2″||3″||561.00|
|SH2ECAL||LEFT End cap||11.5″||2″||3′||16.00|
|SH2ECAR||RIGHT End cap||11.5″||2″||3′||16.00|